You are here: Home > File Downloads
Software Updates
Contact PdMA if:
Which version of WinVis are you currently using?
If you are unsure which version you have, start WinVis and select About or Help, About from the menu bar. The version number and build number will be displayed in the window.
WinVis 5.0
WinVis 4.3
Click here for the latest update.
WinVis 5.0 Build 152 Update
If you have any questions contact PdMA Technical Support at 813-621-6463 ext. 251 or email Technical Support.
WinVis 5.0 Build 152 enhances the pre-trigger capability of the In-Rush/Start-Up test and provides a procedure for parking the shuttle prior to shipping the tester.
Minimum Requirements: WinVis 5.0 Build 106 (Build 119 for Windows XP/2000)
WinVis 5.0 Build 152
Return to top of page
Return to PdMA home
The WinVis 5.0 Build 106 update revises our current version of WinVis32 to WinVis 5.0. The update enhances the design of our software for both stand-alone and network users. Many of the improvements are based on customer feedback.
Download the WinVis 5.0 Build 106 update file only if you have WinVis 5.0. If you are unsure which version you have, start WinVis and select About or Help, About from the menu bar. The version number and build number will be displayed in the window. If you have WinVis 4.3 software, do not download this file. Refer to the WinVis 4.3 download section on this website.
To begin the update, select your operating system (OS), then select unit type, and finally select product from the drop-down list boxes below. The appropriate update window automatically appears.
WinVis 4.3 Updates
Emax and MCEmax users should download this file if there is a problem running in-rush starter using the pre-trigger option. Some Windows 95 users experience a file conflict which this file will fix. This file also makes the graph retain the focus instead of the history chart for the trend graph in the power window.
AIS Update
Download this file only if you have the Advanced Insulation System (AIS) accessory and currently have version 4.3. This file will enable the AIS to more accurately verify removal of the MCE test leads prior to application of potentially hazardous voltages (and includes all of the enhancements of build 48). To start the download, click on the link below and save the file to your hard drive. When the download is complete, double-click the file, update43-50.exe, to extract the new file to your WinVisn folder.
WinVis 4.3 build 50
Software Support
WinVis 4.21 CD Installation - This file (install.exe) will walk you through installing WinVis on either a tester or a desktop machine. This is a self-extracting zip file. After downloading, double-click the file and it will unzip install.doc, a Word 97 document.
How to set up two hardware profiles - Download this file (Boot_Up.exe) if you have an MCEMax or EMax and use a second PCMCIA card. There can be conflicts between the DAQ card and other PCMCIA devices. This document explains (with screen captures) how to set up windows 95 or windows 98 to initialize only the selected PCMCIA device at start up. You select which device to enable each time you start the computer. This is a self-extracting zip file. After downloading, double-click the file and it will unzip Boot-Up.doc, a Word 97 document.
If you don't have Microsoft Word, download a free Word Viewer and the installation instructions .
Vendor Support
Dell Service and Support - file download library
NEC Service and Support - file download library
